The Stickmote is a basic WiFi remote featuring an analog joystick.
One 5mm LED is also included and connected to GPIO P18 (PWM).
- Power input: 1S (single-cell) LiPo
- BAT_LEVEL: P3
- CHARGING: P4
WiFi (ESP8266) Connection
- Flash: P8
- Reset: P9
- Enable: P10
- Vertical: P0
- Horizontal: P1
- Button: P2
- LED 0: P18
No pins are exposed except for the LiPo battery, which is clearly labeled directly on the board itself.
The Stickmote is meant to be used as-is, or serve as basic reference for building more advanced devices.