Stickmote

From Dooba Wiki
Jump to navigation Jump to search
Stickmote board

Introduction

The Stickmote is a basic WiFi remote featuring an analog joystick.

It includes a Nomad module for power as well as a small 128x32 OLED display.

One 5mm LED is also included and connected to GPIO P18 (PWM).

Specifications

  • Power input: 1S (single-cell) LiPo

Nomad Connection

  • BAT_LEVEL: P3
  • CHARGING: P4

WiFi (ESP8266) Connection

  • Flash: P8
  • Reset: P9
  • Enable: P10

Joystick Connection

  • Vertical: P0
  • Horizontal: P1
  • Button: P2

LED

  • LED 0: P18

Pinout

No pins are exposed except for the LiPo battery, which is clearly labeled directly on the board itself.

The Stickmote is meant to be used as-is, or serve as basic reference for building more advanced devices.

Stickmote-pinout.png

Schematic

Stickmote-schematic.png