Nomad

From Dooba Wiki
Jump to navigation Jump to search
Nomad board

Introduction

The Nomad is a single-cell LiPo battery module.

It allows charging and provides two regulated outputs: 5.0V and 3.3V.

Specifications

  • Battery type: 1S (single-cell) LiPo
  • Charge current: 100mA
  • Charge voltage: 4.2V
  • Power Input: 5.0V
  • Outputs: 3.3V & 5.0V
  • Charger: MCP73832
  • Booster: MCP1642
  • Charge status (On-Off) digital output
  • Battery-level analog output
  • Onboard switch to disconnect output

The CHARGING output pin is active-low (0 = Battery is charging / 1 = Battery is not charging).

The BAT LEVEL output is the analog voltage measured at the battery, scaled down to 3.3V.

Pinout

The diagram below shows the pin assignments for the Nomad:

Nomad-pinout.png

Schematic

Nomad-schematic.png